Hevea Research Articles

Single and basal crop coefficients for estimation of water requirements of subtropical and tropical orchards and plantations with consideration of fraction of ground cover, height, and training system

AbstractThis paper provides an overview of the research carried out over the last 25 years on the FAO56 single and basal crop coefficients of subtropical and tropical orchards and plantations of cactus pear, dragon fruit, fig, jujube, passion fruit, pomegranate, cape gooseberry, cherimoya, guava, longan, lychee, mango, papaya, acerola, carambola, cashew, cacao, coffee, jaboticaba, jatropha, macadamia, açai palm, coconut, date palm, guayule, oil palm, peach palm, ramie and rubber tree. The main objective of this review is to update standard single crop coefficients (Kc) and basal crop coefficients (Kcb) and complete the Kc and Kcb values tabulated in FAO56. Kc is the ratio between the non-stressed crop evapotranspiration (ETc) and the grass reference evapotranspiration (ETo), and Kcb is the ratio between the crop transpiration (Tc) and the ETo. When selecting and analysing the literature, only studies that used the FAO Penman–Monteith equation, or another equation well related to the former to compute ETo were considered, while ETc or Tc were obtained from accurate field measurements on crops under pristine (non-stress cropping conditions) or eustress (“good stress”) conditions. Articles meeting these conditions were selected to provide data for updating Kc and Kcb under standard conditions. The related description of orchards and plantations refers to crop cultivar and rootstock, irrigation systems and scheduling, planting spacing, fraction of ground cover (fc) by the crops, crop height (h), crop age and training systems, as Kc and Kcb values depend on these characteristics. To define the standard Kc and Kcb values of the selected crops, the values collected in the literature were compared with previously tabulated standard Kc and Kcb values. The updated tabulated values are transferable to other locations and climates and can be used to calculate and model crop water requirements, primarily for irrigation planning and scheduling, and thereby supporting of improved water use and savings, which is the overall aim of the current review.

Mitochondrial genome variation and intergenomic sequence transfers in Hevea species

Among the Hevea species, rubber tree (Hevea brasiliensis) is the most important source of natural rubber. In previous studies, we sequenced the complete nuclear and chloroplast genomes of Hevea species, providing an invaluable resource for studying their phylogeny, disease resistance, and breeding. However, given that plant mitochondrial genomes are more complex and more difficult to assemble than that of the other organelles, little is known about their mitochondrial genome, which limits the comprehensive understanding of Hevea genomic evolution. In this study, we sequenced and assembled the mitochondrial genomes of four Hevea species. The four mitochondrial genomes had consistent GC contents, codon usages and AT skews. However, there were significant differences in the genome lengths and sequence repeats. Specifically, the circular mitochondrial genomes of the four Hevea species ranged from 935,732 to 1,402,206 bp, with 34–35 unique protein-coding genes, 35–38 tRNA genes, and 6–13 rRNA genes. In addition, there were 17,294–46,552 bp intergenomic transfer fragments between the chloroplast and mitochondrial genomes, consisting of eight intact genes (psaA, rrn16S, tRNA-Val, rrn5S, rrn4.5S, tRNA-Arg, tRNA-Asp, and tRNA-Asn), intergenic spacer regions and partial gene sequences. The evolutionary position of Hevea species, crucial for understanding its adaptive strategies and relation to other species, was verified by phylogenetic analysis based on the protein-coding genes in the mitochondrial genomes of 21 Malpighiales species. The findings from this study not only provide valuable insights into the structure and evolution of the Hevea mitochondrial genome but also lay the foundation for further molecular, evolutionary studies, and genomic breeding studies on rubber tree and other Hevea species, thereby potentially informing conservation and utilization strategies.

Genome-wide identification and characterisation of hevein precursor genes in Hevea brasiliensis

Hevea brasiliensis is the primary source of natural rubber, which is obtained from its latex and used in the manufacturing of various products. Hevein is a small protein found in the latex, produced by post-translational cleavage of prohevin, which is encoded by the hevein precursor gene. It exhibits antimicrobial and agglutination properties. Several nucleotide sequences that encode the hevein precursor genes were reported, however, the sequences are not characterised well. In the present study, four full-length hevein precursor sequences (Hevein 1–4) were obtained by manually curating the sequences from different databases. All sequences show high homology with the highest identity between Hevein 1 and Hevein 3. In a phylogenetic analysis along with sequences from related plants, all sequences from H. brasiliensis were clustered into a specific clade. All hevein precursor genes were expressed in the latex samples obtained from three clones; RRIM 600, RRIM 3001 and PB 350 of less than one year old and five-year-old RRIM 3001 plants, grown in plant house, as well as field-grown trees of clone PB 350 belonging to three different ages; two years, six years and fifteen years. All hevein precursor genes in the five-year-old RRIM 3001 plants with stunted growth, maintained in the plant house showed alternative splicing. Hevein 3 was expressed with two splice variants, one with intron retention and the other without intron whereas the other genes were expressed with only intron retained variant. Differential expression analysis using nanoplate digital PCR showed that Hevein 2 and Hevein 3 were expressed with no significant difference among the three young H. brasiliensis clones. The expression of Hevein 2 and Hevein 3 among the H. brasiliensis clone PB 350 of different ages grown in field conditions showed significant difference. The present study provides a better understanding on the importance of hevein precursor genes in different physiological responses which will be useful for further research leading to the genetic improvement of H. brasiliensis.

Rapid Determination of Taraxacum kok-saghyz Rubber Content Using a Pyrolyzer Hyphenated with a Miniaturized Mass Spectrometer

Taraxacum kok-saghyz (TKS), a rubber-producing plant with excellent potential, emerges as a viable substitute for rubber tree (Hevea brasiliensis). While natural rubber is a desirable material, conventional techniques for assessing rubber content have faced challenges in meeting practical production requirements. To address this issue, we have developed a pyrolysis–mass spectrometry (PY-MS) instrument for the quantitative evaluation of natural rubber (NR) content in rubber-producing plants. The derived standard curve equation, established for the detection of TKS dry weight through external standard calibration, demonstrates a correlation coefficient (R2) surpassing 0.99. The method exhibits commendable recovery rates (93.27–107.83%), relative standard deviations (RSD ≤ 3.93%), and a swift analysis time of merely 10 min per sample, thereby enabling accurate and efficient quantification of NR dry weight. Additionally, the PY-MS system we designed can be modified for vehicular use, enabling on-site, in situ analysis, and it provides substantial support for TKS breeding and propagation efforts. This approach possesses significant potential for extensive utilization in the assessment of rubber content in rubber-producing plants other than TKS. The integration of pyrolysis–mass spectrometry for the identification of polymers with high molecular weight offers a valuable pathway for the examination of diverse polymers.

Livelihoods Transformation and Climate Change Adaptation of the Ethnic Minorities: A Case Study of the Khmer People in Binh Phuoc Province, Vietnam

Typhoons, floods, and droughts brought on by climate change in Vietnam have severely damaged the livelihoods of farmers, particularly those of the Khmer people in Binh Phuoc province. In the Khmer community, drought has resulted in widespread crop deaths and livestock without food sources for more than ten years. Using qualitative data sources from in-depth interviews and participant observations in the community at several times in 2020, 2021, 2022, and 2023, the study aims to examine the Khmer community’s livelihood transformation to adapt to climate change. The findings show that, in response to extreme weather events, the community has changed crops from growing pepper and rice to drought-tolerant rubber, cashew, and fruit trees; they have also shifted their livestock from buffalo to goats and cows. Families with limited land for production have divided their resources to become workers and other secondary sources of income. This transformation shows how dynamically livelihoods are adapting to climate change while also helping the Khmer people become less vulnerable to weather-related shocks. The article also makes some suggestions for policy about the livelihoods of the Khmer people in relation to environmental challenges and climate change.

Advancing image segmentation with DBO-Otsu: Addressing rubber tree diseases through enhanced threshold techniques.

Addressing the profound impact of Tapping Panel Dryness (TPD) on yield and quality in the global rubber industry, this study introduces a cutting-edge Otsu threshold segmentation technique, enhanced by Dung Beetle Optimization (DBO-Otsu). This innovative approach optimizes the segmentation threshold combination by accelerating convergence and diversifying search methodologies. Following initial segmentation, TPD severity levels are meticulously assessed using morphological characteristics, enabling precise determination of optimal thresholds for final segmentation. The efficacy of DBO-Otsu is rigorously evaluated against mainstream benchmarks like Peak Signal-to-Noise Ratio (PSNR), Structural Similarity Index (SSIM), and Feature Similarity Index (FSIM), and compared with six contemporary swarm intelligence algorithms. The findings reveal that DBO-Otsu substantially surpasses its counterparts in image segmentation quality and processing speed. Further empirical analysis on a dataset comprising TPD cases from level 1 to 5 underscores the algorithm's practical utility, achieving an impressive 80% accuracy in severity level identification and underscoring its potential for TPD image segmentation and recognition tasks.

Dynamic analysis of resistance in Colombian elite Hevea brasiliensis genotypes as a breeding strategy for enhancing South American leaf blight management under disease non-escape conditions in the Amazon region

AbstractSouth American Leaf Blight (SALB) is the primary limitation to the establishment of new rubber (Hevea brasiliensis) crops in Latin America. This study aimed to assess the temporal dynamics of resistance to SALB in 99 elite Colombian genotypes and the IAN 873 cultivar (control) of H. brasiliensis in small-scale clone trials conducted under conditions with a high disease prevalence in the northwestern Colombian Amazon. Resistance monitoring was carried out on a monthly basis and analyzed over five climatic periods. Three variables were recorded: attack severity (AT, ranging from 0 to 4), reaction type (TR, ranging from 1 to 6) and stromal density (ST, ranging from 0 to 4). The maximum scores for TR and ST were used to classify the level of resistance of the genotypes. Highly significant differences in the mean values of AT, TR and ST among the genotypes, across the periods, and in the interaction between genotype and period were found. Over time, an increase in symptoms (AT) and signs (TR and ST) of SALB was observed. During the rainy periods, SALB intensity was highest, resulting in a leaf area affected ranging from 16 to 30%. Eight genotypes showed partial resistance (PR) (TR < 5 and ST < 2), while 16 genotypes demonstrated complete resistance (CR) (TR < 3 and ST = 0), and 76 genotypes were highly susceptible (HS) (TR > 5 or ST > 2). The temporal analysis identified 23 Colombian superior genotypes with varying degrees of SALB resistance, which can be a valuable breeding resource for improving SALB management in the Colombian Amazon region.

Analysis and prediction of rubber tree phenological changes during Pestalotiopsis infection using Sentinel-2 imagery and random forest

Analysis and prediction of rubber tree phenological changes during Pestalotiopsis infection using Sentinel-2 imagery and random forest

Fuzzy time series dalam meramalkan jumlah produksi karet di Sumatra Utara

Rubber (Hevea brasiliensis) belongs to the genus Heveadari familia Euphorbiaceae which is a tropical woody tree native to the amazon jungle. Rubber is one of the plantation crops that is very important for the economy in Indonesia. Rubber production in North Sumatra has increased every year. To find out whether the amount of rubber production in North Sumatra increases or decreases next year by forecasting the amount of rubber production and getting better forecasting results in the future. This estimate can use the fuzzy time series forecasting method. The fuzzy time series uses the fuzzy set theory as the basis for calculations and a concept used to forecast actual data formed with linguistic variables. The method used in predicting the amount of rubber production in North Sumatra is the fuzzy time series method with data from 1997 to 2021. And the result of forecasting rubber production in 2022 is 261997 with MAPE of 0.54%.
 Keywords: Forecasting, rubber production, fuzzy time seriesMSC2020: 62M10, 62M20, 62M86, 03E72

Comparative transcriptomic analysis of rubber (Hevea brasiliensis) clones differing in disease tolerance provides novel insights into the disease response associated with abnormal leaf fall disease caused by Phytophthora meadii

Rubber is an important industrial commodity and Hevea brasiliensis is the commercial source of natural rubber (NR). Abnormal Leaf Fall (ALF) disease caused by Phytophthora meadii is one of the major diseases affecting yield of NR. Understanding Hevea-Phytophthora interaction mechanism is essential to manage this devastating disease. Transcriptome analysis was employed to gain an understanding on the molecular mechanisms that confer resistance to Phytophthora that would facilitate development of disease-tolerant Hevea clones. As our current understanding of Hevea-Phytophthora interaction is limited, an attempt was made to analyze and compare the transcriptomes of tolerant and susceptible clones of H. brasiliensis in response to P. meadii infection (in healthy and Phytophthora challenge-inoculated condition) during early, middle and late phases of infection by using the RNA-Seq technology. The transcriptome sequencing generated an average of 19,000 differentially expressed genes (DEGs) in both clones. When comparing the tolerant clone to the susceptible clone, there was an overall increase in the number of DEGs and a progression in the number of DEGs, indicating a more active engagement of transcriptional activity in the tolerant clone. Functional annotation, KEGG analysis and enrichment analysis revealed that the major pathways enriched for the DEGs were involved in plant hormone signal transduction and plant-pathogen interaction. An analysis of DEGs during each phase showed that the most active transcripts involved in defense mechanisms were activated during mid-phase and in the case of susceptible clone least transcripts were induced during mid-phase than in any other phase in both the clones. Many DEGs belonging to the MYB, NAC, WRKY and AP2/ERF transcription factor families were observed in both clones. Comparative studies revealed their differential involvement in tolerant and susceptible clones against Phytophthora infection. These findings may facilitate further exploration of Hevea-Phytophthora interaction and in cloning for defense related genes.

Four new species of Utivarachna Kishida, 1940 (Araneae: Trachelidae) from Sumatra.

Four new species of trachelid spiders belonging to the genus Utivarachna Kishida, 1940 are described: U. angsoduo sp. nov., U. balonku sp. nov., U. rimba sp. nov., and U. trisula sp. nov. Part of the EFForTS project, the spider specimens were uncovered in a canopy fogging collection of tree crown arthropods along a land-use gradient from rainforest via jungle rubber (rubber agroforestry) to monocultures of rubber and oil palm in Jambi Province, Sumatra, Indonesia. Three of the proposed new species were found exclusively in rainforest or jungle rubber agroforest (U. angsoduo sp. nov., U. rimba sp. nov., U. trisula sp. nov.), and one of them exclusively in monocultures of rubber trees (U. balonku sp. nov.). We provide photographs and distribution maps for the proposed new species, and discuss their potential ecology based on their sampling locations. We also encountered a fifth species of the genus in all four land-use systems, U. phyllicola Deeleman-Reinhold, 2001, one of two species of the genus previously recorded from Sumatra, and also provide photographs and distribution maps for this species in the research area of the EFForTS project.

Overexpression of HbGRF4 or HbGRF4-HbGIF1 Chimera Improves the Efficiency of Somatic Embryogenesis in Hevea brasiliensis.

Transgenic technology is a crucial tool for gene functional analysis and targeted genetic modification in the para rubber tree (Hevea brasiliensis). However, low efficiency of plant regeneration via somatic embryogenesis remains a bottleneck of successful genetic transformation in H. brasiliensis. Enhancing expression of GROWTH-REGULATING FACTOR 4 (GRF4)-GRF-INTERACTING FACTOR 1 (GIF1) has been reported to significantly improve shoot and embryo regeneration in multiple crops. Here, we identified endogenous HbGRF4 and HbGIF1 from the rubber clone Reyan7-33-97, the expressions of which dramatically increased along with somatic embryo (SE) production. Intriguingly, overexpression of HbGRF4 or HbGRF4-HbGIF1 markedly enhanced the efficiency of embryogenesis in two H. brasiliensis callus lines with contrasting rates of SE production. Transcriptional profiling revealed that the genes involved in jasmonic acid response were up-regulated, whereas those in ethylene biosynthesis and response as well as the S-adenosylmethionine-dependent methyltransferase activity were down-regulated in HbGRF4- and HbGRF4-HbGIF1-overexpressing H. brasiliensis embryos. These findings open up a new avenue for improving SE production in rubber tree, and help to unravel the underlying mechanisms of HbGRF4-enhanced somatic embryogenesis.

Morphology and molecular characterization of Colltetotrichum siamense associated with leaf spot disease of rubber tree (Hevea brasiliensis) in southern Thailand

Rubber (Hevea brasiliensis) is an economically important crop in Thailand, especially in the southern part of Thailand where the climate is suitable for cultivation. In our recent survey of rubber plantations, rubber trees infected with several fungal pathogens resulting in leaf spot, leaf blight, and in severe cases, leaf defoliation, were observed in the field. These symptoms have not been observed previously and can be considered a novel leaf fall disease. To date, the pathogens causing leaf diseases on rubber trees in Thailand have been characterized to be caused by fungi in the genera Calonectria, Lasiodiplodia, and Neopestalotiopsis. However, species in the genus Colletotrichum, as fungal pathogens that cause leaf spots on rubber trees in Thailand, have not been characterized. Therefore, the aim of this study was to identify and characterize Colletotrichum siamense associated with rubber leaf spot disease with morpho-molecular studies combined with pathogenicity tests. Morphological characteristics revealed that isolates PSU-108, PSU-109, PSU-110, and PSU-111 belong to Colletotrichum sp., whereas multigene phylogenetic analyses with actin (act), calmodulin (cal), chitin synthase-1 (chs-1), glyceraldehyde-3-phosphate dehydrogenase (gapdh), and internal transcribed spacer (ITS), identified these isolates as Colletotrichum siamense. Hence, this report suggests C. siamense as the causal agent of leaf spot disease on rubber tree leaves. The findings in this study could be helpful for the development of appropriate measures to manage plant disease in rubber tree fields.

Planting patterns in rubber agroforestry (Hevea brasiliensis) developed by the communities of Menggala Mas Village, Lampung Province, Indonesia

Abstract The agroforestry system provides important economic and ecological benefits for local communities, one of which is obtained from the application of planting patterns and plants species in it. This research aims to explain the planting pattern of rubber agroforestry developed by the community in Menggala Mas Village, Lampung Province, Indonesia. The approach in this research is qualitative. Data collection methods included observation, in-depth interviews, and documentation studies. The planting patterns of agroforestry system on their rubber plants were analysed. The research results showed that there are three agroforestry planting patterns implemented by the community, namely, alley cropping, trees along border and random mixture. The dominant combinations in alley cropping were rubber/karet (Hevea brasiliensis) – pulai (Alstonia scholaris) and rubber–mentru (Schima wallichii) – kayu afrika (Maesopsis eminii). The dominant combinations in trees along border were rubber–akasia (Acacia auriculiformis), rubber–jackfruit (Artocarpus heterophyllus) – cempedak (Artocarpus integer) and rubber–petai (Parkia speciosa) – jati (Tectona grandis). The dominant combinations in the random mixture were rubber–jengkol (Pithecellobium lobatum), rubber–petai–jengkol–akasia, rubber–jackfruit–cempedak, rubber–pulai–mengkudu (Morinda citrifolia L.) – jengkol and rubber–banana (Musa paradisiaca) – gadung (Dioscorea hispida) – sungkai (Peronema canescens Jack). Forty-one plant species were found. The local community wants to develop this planting pattern because the rubber agroforestry planting pattern can provide direct and indirect benefits such as a greater variety of plants which can increase their income; also, the products can be sold or consumed by the family, as a fence, fire break or barrier to other farmers’ land, can provide shade to reduce hot temperatures when farmers are working, and can reduce the risk of flooding and soil erosion to support soil and water conservation within the ‘Omou’ (garden/forest). The government and agricultural extension workers need to carry out regular guidance and outreach programmes regarding rubber agroforestry development strategies to increase public knowledge.

Differential Water Conservation Capacity in Broadleaved and Mixed Forest Restoration in Latosol Soil-Eroded Region, Hainan Province, China.

The water conservation capacity of the litter and soil layers of forest ecosystems improves the function of forest ecosystems in conserving soil and water. Plantation restoration plays a key role in preventing soil erosion. In order to evaluate the water conservation capacity of plantation restoration in Latosol soil-eroded region, we analyzed the litter thickness and mass, water absorption process, water holding recovery process, and soil water holding capacity of five restoration types (Hevea brasiliensis, Acacia mangium, Eucalyptus robusta, Acacia-Eucalyptus, and Acacia-Hevea) in the Mahuangling Watershed, Hainan province. The results showed that the thickness of the litter ranged from approximately 3.42 ± 0.24 to 4.73 ± 0.81 cm, and the litter mass ranged from 5.04 ± 1.52 t·ha-1 to 13.16 ± 1.76 t·ha-1, with higher litter mass in the SL layer than in the UL layer. The litter mass of A. mangium was higher than that of H. brasiliensis, E. robusta, Acacia-Eucalyptus, and Acacia-Hevea, which was 3.16 ± 1.76 t·ha-1. A. mangium forest was significantly higher than other plantation restoration types in terms of the maximum water retention capacity (Qmax) and the effective water retention capacity (Qeff). The soil bulk weight ranged from approximately 1.52 ± 0.09 to 1.59 ± 0.08 g·cm-3, and porosity ranged from 31.77 ± 4.72 to 35.62 ± 3.02%, both of which increased with the depth of the soil layer. The water holding capacity of 0-60 cm soil varied from approximately 12.94 ± 7.91 to 45.02 ± 31.79 t·ha-1, with A. mangium having the best soil permeability and the strongest soil water holding capacity. The entropy weight method was used to conduct a comprehensive evaluation, and the results showed that the water conservation capacity of the soil layer was 1.26 times higher than that of the litter layer, in which the water conservation capacity of A. mangium was the strongest, with a comprehensive evaluation value of 0.2854, which effectively intercepted rainfall and reduced surface runoff. Hence, we suggest that the planting of A. mangium should be considered in future ecological restoration projects of the erosion area of Mahuangling in order to improve the function of conserving soil and water in a restoration forest ecosystem.

Identification and characterisation of causal pathogens of Pestalotiopsis leaf fall disease in Hevea brasiliensis using a detached leaf technique

Identification and characterisation of causal pathogens of Pestalotiopsis leaf fall disease in Hevea brasiliensis using a detached leaf technique

A Review on the Status of Rubber Plantations in Cambodia

The rubber tree (natural rubber) is a tropical crop around the world. In Cambodia, rubber is one of the most popular agro-industrial crops introduced since the 1910s. This study review article aims to demonstrate the methods for planting and harvesting techniques in rubber plantations. Cultivation is the most important factor in the rubber sector, and planting is done during June and July. Moreover, selecting varieties of clonal rubber is the best way to improve high production, high initial vigor, tolerance to climate change, pests, wind damage, and diseases, and to be a good secondary characteristic. In addition, harvesting techniques are vital elements in the status of rubber plantations. So, improving the methods of cultivation and the techniques of harvesting is very important in order to get a high amount of rubber production.

Geographical Differences Weaken the Convergence Effect of the Rhizosphere Bacteria of Rubber Trees

The rhizosphere has been observed to both enrich and deplete soil microorganisms, but it remains unclear whether rhizosphere microorganisms of the same species exhibit convergence in different climatic regions. This study employed high-throughput sequencing technology to analyze the bacterial communities in the soil, rhizosphere, and rhizoplane of rubber trees across varying climatic regions. The findings revealed the following: Firstly, the rhizoplane bacteria demonstrated a convergent effect. In Hainan and Xishuangbanna, two core operational classification units (OTUs) were enriched from the soil, while four core OTUs were depleted, indicating that the rhizoplane bacteria were influenced by host regulation and exhibited a certain degree of convergence due to the rhizosphere effect. Secondly, the rhizoplane bacteria exhibited a geographic distribution pattern, with significant differences observed in different climatic regions. Notably, there were significant variations in α- and β-diversity, with Xishuangbanna displaying significantly higher diversity compared to Hainan. Moreover, significant differences were observed at the phylum level in terms of composition. Temperature, soil organic matter, soil total nitrogen, and total phosphorus were identified as the primary factors contributing to these differences. In conclusion, although some convergence was observed in the rhizoplane bacteria, the influence of geographic differences weakened this effect.

Estimating the girth distribution of rubber trees using support and relevance vector machines

Estimating the girth distribution of rubber trees using support and relevance vector machines

Carbonization temperature at 400°C and the behavior in the visual degradation of 15 wood species

Wood is an anisotropic material and its exposure to carbonization leads to reduced humidity and increased deformation due to the loss of its aesthetic and functional profile. Moisture may be an explanatory factor for the damage caused to the surface region of the coal. For this work, they were defined according to a basic density gradient, that is, involving species of low, medium and high densities, native and exotic, hardwood and conifers, as well as commercial and non-commercial uses. Among the species selected were: (Qualea sp.) Mandioqueira, (Aspidosperma sp.) Peroba, (Erisma uncinatum) Cedrinho, (Pinus elliotii) Pinus, (Eucalyptus.sp) Eucalipto, (Araucaria angustifolia) Pinheiro do Paraná, (Couratari sp.) Tauari, (Dipteryx sp.) Cumaru, (Tabebuia sp.) Ipê, (Peltogyne sp.) Roxinho, (Apuleia leiocarpa) Garapeira, (Goupia glabra) Cupiúba, (Astronium lecointei) Muiracatiara, (Hevea brasiliensis) Seringueira and (Schizolobium parahyba) Guapuruvu.  At temperatures of 400 ºC, damage occurred in all species, with the influence of the temperature applied on the degradation suffered in the samples studied. The images produced can contribute to the understanding of charcoal as a material in its various temperature passages and thermal processes, in addition to analyzing the anatomy of charred samples, using the terms: ruptures and fissures as damage to charred wood as parameters.